Rode NTG8 Moisture-Resistant Long Shotgun Microphone

SKU
NTG8
  • For Broadcast, Film, and Sporting Events
  • Moisture-Resistant for Humid Conditions
  • No Switches, Buttons, or Dials
  • 40 Hz to 20 kHz Frequency Response
  • Natural On- and Off-Axis Sound
  • Focused... Read More
AED 4,043.00 AED 3,850.48
Pre-Order to secure your piece
Orders shipped within 3 business days.

Secure Checkout with...

Rode NTG8 Overview

Optimized for high-quality outdoor performance in broadcasting, film production, and sporting events, the Rode NTG8 moisture-resistant shotgun microphone offers the proven technology of the award-winning NTG3 in a longer body with more focused directionality throughout its frequency spectrum.

Professional-level features such as ultralow-noise circuitry, enhanced immunity to radio-frequency interference, and minimal handling noise reduce the need to repair and restore audio in postproduction. Its switch- and dial-free design lets you set up quickly and focus on the sound instead of fiddling with various mic settings.

The NTG8's ultrahigh sensitivity allows it to produce robust output levels without having to apply extreme gain at your mic preamp. Sonically, the NTG8 delivers natural on- and off-axis sound due in part to its long interference tube. Clarity is further maintained by the gentle rise in high frequencies and the rumble-reducing attenuation of low bass frequencies.

Designed to Withstand Adverse Environmental Conditions

When your work takes you outdoors, you're bound to encounter humidity and condensation, which can cause many mics to fail. The NTG8's RF bias technology makes it almost completely resistant to moisture, allowing you to reliably capture high-quality audio in normal and adverse environmental conditions. It also includes a weatherproof aluminum storage cylinder for maximum protection during travel.

Broadcast-Quality Sound

The NTG8 was engineered for broadcast-quality sound, enhanced immunity to RF (radio frequency) interference, and low handling noise. Plus, its balanced output allows longer cable runs than most camera-mount shotgun microphones.

The combination of the NTG8's 22" long body and supercardioid polar pattern yields focused on-axis directionality with minimal coloration at the on- and off-axis points. The NTG8's ultralow self-noise of 8 dBA and highly sensitive condenser element allow it to produce detailed audio released from the hiss found in many low-cost microphones.

Phantom Powered

Thanks to its 3-pin XLR output and compliance with 44 to 52 VDC phantom power, the NTG8 is compatible with a variety of handheld audio recorders, field recorders, and mixer adapters as well as built-in preamps on many camcorders and cinema cameras. The NTG8 utilizes a custom-designed XLR connector—specially designed to reduce susceptibility to RF interference from devices such as mobile phones and other transmitters.

Ideal for Boompole or Stand Mounting

The NTG8's included shockmount ensures easy placement on a mic stand or boompole while impeding the transfer of vibrations to the mic. Additionally, the shockmount features integrated clips for tidy cable management. The mic's housing is both durable and lightweight, and its matte black finish prevents reflections in the shot.

Windscreen Minimizes Wind Noise

The NTG8 has a foam windscreen to reduce unwanted wind noise from light breezes, fans, heaters, and air conditioners. For maximum reduction of handling noise and wind noise in outdoor environments, consider the separately available Rycote Windshield Kit 11—a complete blimp, furry windshield, and shockmount suspension system.
get real warranty on Rode NTG8 Moisture-Resistant Long Shotgun Microphone at Digi Tech Trading LLC
It's always easy to shop for shotgun microphones at Digi Tech Trading LLC because you can browse by best sellers, brand, price range, customer rating, or special offers. And you can take advantage of free shipping within UAE. Digi Tech Trading LLC Rode NTG8 Moisture-Resistant Long Shotgun Microphone - your trusted source of filmmaking equipments
Write Your Own Review
You're reviewing:Rode NTG8 Moisture-Resistant Long Shotgun Microphone
Your Rating

Rode NTG8 Specs

Microphone
Form Factor Stand/Boom Mount
Sound Field Mono
Operating Principle Line Gradient
Capsule Condenser
Diaphragm 0.5" / 12.70 mm
Polar Pattern Supercardioid
Orientation End Address
Circuitry Solid-State
Pad None
High-Pass Filter None
Tone Adjustment None
Gain Adjustment None
Indicators None
On-Board Controls None
Windscreen Foam (Included)
Performance
Frequency Range 40 Hz to 20 kHz
Maximum SPL 124 dB SPL (1 kHz, 1% THD, 1-Kilohm Load)
Off-Axis Rejection 16 dB at 60°
24 dB at 120°
>20 dB at 180°
Impedance 25 Ohms
Sensitivity -20 dBV/Pa at 1 kHz
Output Level 8.2 dBu (Max)
Dynamic Range 116 dB
Signal-to-Noise Ratio 81 dB A-Weighted
Equivalent Noise Level 8 dB A-Weighted
Output Connectors (Analog) 1 x XLR 3-Pin Male (on Mic)
Power
Operating Voltage 44 to 52 V (Phantom Power)
Operating Current Consumption 2.5 mA
Physical
Color Silver
Mounting 3/8"-16 Female, 5/8"-27 Female, Shockmount (with Included Hardware)
Included Case Transport Tube
Dimensions ø: 0.75 x L: 22.01" / ø: 1.9 x L: 55.9 cm (Microphone)
Weight 12.17 oz / 345 g (Microphone)
Packaging Info
Package Weight 3.5 lb
Box Dimensions (LxWxH) 28.5 x 6.1 x 3.2"
  • Rode NTG8 Moisture-Resistant Long Shotgun Microphone
  • Rode SM8 Shockmount for Long Shotgun Microphones
  • Windscreen
  • Aluminum Storage Cylinder
  • Limited 1-Year Warranty

SHIPMENTS AND RETURNS

YOUR PACK SHIPMENT

Packages are generally dispatched within 3 working days after receipt of payment and are shipped via Courrier.

If you prefer delivery by UPS Extra with required signature, an additional cost will be applied, so please contact us before choosing this method. Whichever shipment choice you make, we will provide you with a link to track your package online.

Shipping fees free for orders above 300 AED within UAE , for international shipping please contact us before placing your order

RETURN POLICY 

FOR ONLINE PURCHASES ONLY
NOTE: - THIS POLICY IS ONLY APPLICABLE FOR ONLINE ORDERS AND DOES NOT APPLY IN DIGI TECH Office
• Articles are accepted for return in case of any manufacturing defect if returned in an unused condition within 10 days from the date of delivery.
• You may return any article subject to our acceptance on the condition that it was not worn, damaged, resized, engraved or altered.
• On receipt of the product, our quality assurance department will review the condition and make a declaration of acceptance or non acceptance.
• On the basis of the declaration, we will inform you the status within 7 working days of receiving the product.
• On acceptance for product return, we will process your request for the refund within 7 working days.
• Refunds on the purchases made with the credit card will only be credited to the same card. Please allow one month billing cycle in order for your credit card to appear.
• International Shipping charges (for all items shipped outside UAE) will be deducted for all returns based on the applicable shipping charges.
EXCLUSIONS
Items bought through Promotional offers are not eligible for return.
HOW TO PROCEED WITH YOUR RETURN
Call our Customer Service Department on +9714 259 5447 or send a mail to
[email protected]
Include all original packaging and collateral material. 
Please provide at least the following information in your return request package.
• Online Order Number
• Reason for Return
• Your contact details
INSURE YOUR PACKAGE 
Be sure to ship your item fully insured, and request a return receipt for confirmation that your shipment has reached its destination. 
Return shipment charges will be bear by the sender and DIGI TECH will not be responsible for lost or damaged shipment
Please note that returns without any of the above information, uninsured or improperly packaged may not be accepted.
ALL RETURN PACKAGES TO BE MAILED TO:
Attention: Digi Tech Trading LLC.
NO. 504, 5TH FLOOR, City Avenue Building
Deira Port Saied
Dubai, UAE
PO Box 22524 Dubai, UAE 
Tel: +9714 259-5447 
Following the above mentioned instructions will enable us to process your return effectively. 
If you have any questions about our return procedures, please contact us or call +9714 259 5447. Please note that return shipment charges would have to be borne by the sender.