M-Audio BX5 D3 5" 2-Way 100W Powered Studio Monitor (Single)

SKU
BX5D3XEU
  • 5" Kevlar Woofer
  • 1" Silk Dome Tweeter
  • 100W Bi-Amped Power
  • 52 Hz to 35 kHz Frequency... Read More
AED 619.50 AED 590.00
Pre-Order to secure your piece
Orders shipped within 3 business days.

Secure Checkout with...

The BX5 D3 from M-Audio is a 2-way, 100W powered studio monitor designed to offer a wide frequency response and easy configuration for mixers, DJs, producers, and recordists in small control rooms, personal studios, and mobile rigs. The monitor produces a frequency response of 52 Hz to 35 kHz, thanks to two Class A/B amplifiers feeding a 5” Kevlar woofer and 1” silk dome tweeter.

A rear-mounted bass port delivers extended bass response, while the tweeter’s custom waveguide yields a wide sweet spot and minimized high-frequency scatter. Volume and low-frequency controls are provided so you can tune the monitor to cooperate with the sound of the room. Place the monitor on the supplied acoustic foam pad to decouple it from your table or stands, which aids in reducing unwanted bass vibrations.

The BX5 D3 can interface with a variety of equipment, via balanced XLR and balanced/unbalanced 1/4” TRS input jacks. Setup is simple, due to the front-mounted LED, which appears brighter when you are at the ideal angle.

Drivers

A magnetically-shielded 5" military-grade Kevlar woofer provides durability and detailed transient response whilst negating unwanted "cone breakup." It has a high-temperature voice coil and damped rubber surround. The magnetically-shielded 1" silk dome tweeter delivers high frequencies up to 35 kHz with minimal resonance.

Enclosure

The rear-mounted bass port yields extended bass response while reducing audible air turbulence that can occur at high sound pressure levels. The tweeter sits in a custom waveguide designed to lessen scatter and yield a wide sweet spot. The process of aligning the monitor's position is simplified, due to the front-mounted LED, which shines brightly when you're located at the ideal angle.

Amplifiers

The BX5 D3 has two Class A/B amplifiers, a 60W low-frequency amp and a 40W high-frequency amp. A crossover at 2.5 kHz ensures that the correct frequencies are fed to each driver.

Controls

In addition to adjustable volume, there is a low-frequency "Acoustic Space" control. Based upon the sound of your room, you may wish to tweak the bass response to achieve a certain frequency balance.

Connectivity

The BX5 D3 can accept a balanced line-level input at its XLR 3-pin connector. Route balanced or unbalanced signals into the monitor via the 1/4" TRS jack.
get real warranty on M-Audio BX5 D3 5" 2-Way 100W Powered Studio Monitor (Single) at Digi Tech Trading LLC
It's always easy to shop for Speakers (Monitors) at Digi Tech Trading LLC because you can browse by best sellers, brand, price range, customer rating, or special offers. And you can take advantage of free shipping within UAE. Digi Tech Trading LLC M-Audio BX5 D3 5" 2-Way 100W Powered Studio Monitor (Single) - your trusted source of filmmaking equipments
Write Your Own Review
You're reviewing:M-Audio BX5 D3 5" 2-Way 100W Powered Studio Monitor (Single)
Your Rating

M-Audio BX5 D3 Specs

Type2-way
Inputs1 x XLR 3-pin female (balanced)
1 x 1/4" TRS (balanced/unbalanced)
Drivers1 x 5" / 127 mm Kevlar woofer
1 x 1" / 25 mm silk dome tweeter
Amplifier ClassA/B
Power OutputLow Frequency Amp: 60 W
High Frequency Amp: 40 W
Magnetically ShieldedYes
Frequency Response52 Hz to 35 kHz
Crossover Frequency2.5 kHz
Input Sensitivity-10 dBU
Input Impedance10 kOhms (balanced)
20 kOhms (unbalanced)
Maximum SPL110 dB (measured with full-bandwidth pink noise)
Power100 to 120 V, 50/60 Hz
220 to 240 V, 50/60 Hz
Consumption100 W
PolarityPositive signal at "Plus" input produces outward low-frequency cone displacement
Electrical ProtectionRF interference
Output current limiting
Over temperature
Turn on/off transient
Subsonic filter
External mains fuse
Fuse100 to 120 V ~ T1.6AL 250 V
220 to 240 V ~ T1AL 250 V
CabinetVinyl-laminated, high-acoustic-efficiency MDF
Dimensions (W x D x H)6.9 x 7.8 x 10.0" / 176 x 197 x 254 mm
Weight12.3 lb / 5.6 kg
Packaging Info
Package Weight16 lb
Box Dimensions (LxWxH)14.9 x 11.6 x 11"
  • M-Audio BX5 D3 5" 2-Way 100W Powered Studio Monitor (Single)
  • IEC Power Cable
  • Acoustic Foam Pad
  • Limited 1-Year Warranty

SHIPMENTS AND RETURNS

YOUR PACK SHIPMENT

Packages are generally dispatched within 3 working days after receipt of payment and are shipped via Courrier.

If you prefer delivery by UPS Extra with required signature, an additional cost will be applied, so please contact us before choosing this method. Whichever shipment choice you make, we will provide you with a link to track your package online.

Shipping fees free for orders above 300 AED within UAE , for international shipping please contact us before placing your order

RETURN POLICY 

FOR ONLINE PURCHASES ONLY
NOTE: - THIS POLICY IS ONLY APPLICABLE FOR ONLINE ORDERS AND DOES NOT APPLY IN DIGI TECH Office
• Articles are accepted for return in case of any manufacturing defect if returned in an unused condition within 10 days from the date of delivery.
• You may return any article subject to our acceptance on the condition that it was not worn, damaged, resized, engraved or altered.
• On receipt of the product, our quality assurance department will review the condition and make a declaration of acceptance or non acceptance.
• On the basis of the declaration, we will inform you the status within 7 working days of receiving the product.
• On acceptance for product return, we will process your request for the refund within 7 working days.
• Refunds on the purchases made with the credit card will only be credited to the same card. Please allow one month billing cycle in order for your credit card to appear.
• International Shipping charges (for all items shipped outside UAE) will be deducted for all returns based on the applicable shipping charges.
EXCLUSIONS
Items bought through Promotional offers are not eligible for return.
HOW TO PROCEED WITH YOUR RETURN
Call our Customer Service Department on +9714 259 5447 or send a mail to
[email protected]
Include all original packaging and collateral material. 
Please provide at least the following information in your return request package.
• Online Order Number
• Reason for Return
• Your contact details
INSURE YOUR PACKAGE 
Be sure to ship your item fully insured, and request a return receipt for confirmation that your shipment has reached its destination. 
Return shipment charges will be bear by the sender and DIGI TECH will not be responsible for lost or damaged shipment
Please note that returns without any of the above information, uninsured or improperly packaged may not be accepted.
ALL RETURN PACKAGES TO BE MAILED TO:
Attention: Digi Tech Trading LLC.
NO. 504, 5TH FLOOR, City Avenue Building
Deira Port Saied
Dubai, UAE
PO Box 22524 Dubai, UAE 
Tel: +9714 259-5447 
Following the above mentioned instructions will enable us to process your return effectively. 
If you have any questions about our return procedures, please contact us or call +9714 259 5447. Please note that return shipment charges would have to be borne by the sender.