Behringer XENYX QX1002USB 10-Channel USB Mixer with Multi-FX Processor

  • 2 XENYX Mic Preamps, 48V Phantom
  • 4 Stereo Line Inputs
  • Klark Teknik 24-Bit Multi-FX Processor
  • Built-In Stereo USB Interface
  • British-Style 3-Band EQs
  • Built-In One-Knob... Read More
AED 451.50 AED 430.00
Pre-Order to secure your piece
Orders shipped within 3 business days.

Secure Checkout with...

Behringer QX1002USB Overview

The Behringer XENYX QX1002USB is a mixer that offers clear and natural sound in a compact and portable format. With ten inputs, two high-quality XENYX mic preamps, a multi-FX processor with legendary Klark Teknik reverb, and a USB interface, this versatile mixer is ideal for a wide variety of mix and recording applications, from small-stage gigs to home-studios, mid-size corporate events, and more.

The XENYX QX1002USB is quick to set up and operate with all connections and controls easily reachable on the top of the unit. The first two input channels feature XENYX mic preamps, which deliver 130 dB of dynamic range, low-distortion signals, and a wide frequency response extending from 10 Hz to 200 kHz. Switchable 48V phantom power allows you to plug in both dynamic and studio-grade condenser microphones. These channels also offer two 1/4" inputs for line-level signals.

Each mono channel features a British-style, 3-band EQ to provide warm and musical tone corrections for your vocals and instruments, as well as an easy-to-use, "one-knob" compressor to gently smooth out signal peaks for punchy and present bass lines, drums, and vocals that sit right in the mix. Gain knobs let you adjust the input levels and clip LEDs alert you when the signal is too high and about to distort.

The four sets of stereo inputs feature +4/-10 switches used to match the mixer's input sensitivity to the incoming signal. This helps avoid signal degradation when connecting stereo keyboards or playback devices to the mixer. Pan (or balance) and level controls are included for all channels.

To add depth and dimension to your mix, the built-in, Klark Teknik 24-bit multi-FX processor offers 100 presets including reverb, chorus, flanger, delay, pitch-shifter, and a variety of multi-effects. Each channel is equipped with a post-fader FX send, which you can use to send signal to the onboard FX processor or to an external processor. The FX-to-Main knob allows you to control the level of the effect in your main mix. There is also a built-in, stereo USB audio interface for recording your mix directly to a computer. It even comes with the recording and editing software needed to turn your computer system into a complete home recording studio.

The 2-Track section provides an easy way to connect an external 2-track recorder and/or playback device. The 2-Track inputs are assignable to either the main mix or to the control room/phone outputs. The main mix fader controls the signal at both the main outs and 2-Track output, while a dedicated knob adjusts the volume for the phone/control room outputs.

Key Features

  • 2 high-quality, XENYX microphone preamps with 130 dB of dynamic range, for dynamic and condenser microphones
  • Switchable 48V phantom power
  • Mic channels with low-noise and distortion-free circuitry for natural sound reproduction
  • 2 balanced mono line inputs
  • Four balanced stereo pairs of line inputs
  • Neo-classic, British-style 3-band EQs for warm and musical sound
  • 2 studio-grade compressors with super-easy "one-knob" functionality and control LED
  • Legendary Klark Teknik 24-bit FX processor with LCD display
  • 100 FX presets include reverbs, delays, modulation, and multi-effects
  • Built-in stereo USB audio interface to record directly to your computer
  • Free audio recording, editing, and podcasting software, plus 150 instrument/effect plug-ins downloadable at
  • One mono post-fader FX-send knob per channel for internal FX processor and/or as send to external processor
  • Main mix outputs plus separate control room, phones, and stereo 2-Track outputs
  • 2-Track inputs assignable to main mix or control room/phones outputs
  • Designed and engineered in Germany
get real warranty on Behringer XENYX QX1002USB 10-Channel USB Mixer with Multi-FX Processor at Digi Tech Trading LLC
It's always easy to shop for Mixers at Digi Tech Trading LLC because you can browse by best sellers, brand, price range, customer rating, or special offers. And you can take advantage of free shipping within UAE. Digi Tech Trading LLC Behringer XENYX QX1002USB 10-Channel USB Mixer with Multi-FX Processor - your trusted source of filmmaking equipments
Write Your Own Review
You're reviewing:Behringer XENYX QX1002USB 10-Channel USB Mixer with Multi-FX Processor
Your Rating

Behringer QX1002USB Specs

Microphone Inputs 2 x XLR, Balanced, Discrete Input Circuit

XENYX Microphone Preamps with 48 V Phantom Power (Switchable)
Microphone EIN (EIN 20 Hz to 20 kHz)

At 0 Ohm Source Resistance: -133 dB / -137 dB A-Weighted
At 50 Ohms Source Resistance: -130 dB / -134 dB A-Weighted
At 150 Ohms Source Resistance: -127 dB / -131 dB A-Weighted

Frequency Response: <10 Hz to 150 kHz (-1 dB)
Frequency Response: <10 Hz to 200 kHz (-3 dB)

Gain Range: +10 to +60 dB

Maximum Input Level: +12 dBu at +10 dB Gain

Impedance: 1.9 kOhms, Balanced

Signal-to-Noise Ratio: 107 dB / 110 dB A-Weighted (0 dBu In at +22 dB Gain)

Distortion (THD+N): 0.006% / 0.005% A-Weighted
Line Inputs 2 x 1/4" / 6.3 mm TRS, Balanced

Impedance: 20 kOhms Balanced, 10 kOhms Unbalanced 

Gain Range: -10 to +40 dB

Maximum Input Level: +21 dBu at 0 dB Gain
Stereo Line Inputs 4 x pairs of 1/4" / 6.3 mm TRS, Balanced

Impedance: 20 kOhms Balanced / 10 kOhms Unbalanced (+4 dBu Operating Level), 20 kOhms Balanced / 5 kOhms Unbalanced (-10 dBV)

Gain Switch: +4 dBu / -10 dBV

Maximum Input Level: +22 dBu
2-Track I/O Input:
1 x Stereo Pair RCA, Unbalanced 2-Track Inputs
Impedance: 19.5 kOhms
Maximum Input Level: +21 dBu

1 x Stereo Pair RCA, Unbalanced 2-Track Outputs
Impedance: 1 kOhm
Maximum Input Level: +21 dBu
Equalization Low: 80 Hz (±15 dB) Mid: 2.5 kHz (±15 dB) High: 12 kHz (±15 dB)
FX Send 1 x 1/4" / 6.3 mm TRS, Balanced

Impedance: 120 Ohms

Maximum Output Level: +21 dBu
Main Outputs 2 x 1/4" / 6.3 mm TRS, Balanced

Impedance: 120 Ohms, Balanced

Maximum Output Level: +21 dBu
Control Room Outputs 2 x 1/4" / 6.3 mm TRS, Balanced

Impedance: 120 Ohms 

Maximum Output Level: +21 dBu
Headphone Output 1 x 1/4" / 6.3 mm TRS, Stereo, Unbalanced

Maximum Output Level: +21 dBu, 22 Ohms (+25 dBm)
FX Section Type: Klark Teknik

Converter: 24-Bit Sigma-Delta

Sample Rate: 40 kHz
USB Interface Connector: USB Type-B

Audio: Stereo I/O

Sample Rate: 48 kHz
Noise Main Mix at -∞, Channel Fader at -∞: -105 dB / -108 dB A-Weighted

Main Mix at 0 dB, Channel Fader at -∞: -93 dB / -96 dB A-Weighted

Main Mix at 0 dB, Channel Fader at 0 dB: -83 dB / -85 dB A-Weighted
Power Mains Voltage: 120 V, 60 Hz

Power Consumption: 20 W
Dimensions (H x W x D) 2.0 x 7.7 x 9.8" / 50 x 195 x 248 mm
Weight 2.4 lb / 1.1 kg
Packaging Info
Package Weight 5.545 lb
Box Dimensions (LxWxH) 14 x 12.2 x 4.2"
  • Behringer XENYX QX1002USB 10-Channel USB Mixer with Multi-FX Processor
  • PSU6-UL Power Supply
  • Limited 1-Year Warranty



Packages are generally dispatched within 3 working days after receipt of payment and are shipped via Courrier.

If you prefer delivery by UPS Extra with required signature, an additional cost will be applied, so please contact us before choosing this method. Whichever shipment choice you make, we will provide you with a link to track your package online.

Shipping fees free for orders above 300 AED within UAE , for international shipping please contact us before placing your order


• Articles are accepted for return in case of any manufacturing defect if returned in an unused condition within 10 days from the date of delivery.
• You may return any article subject to our acceptance on the condition that it was not worn, damaged, resized, engraved or altered.
• On receipt of the product, our quality assurance department will review the condition and make a declaration of acceptance or non acceptance.
• On the basis of the declaration, we will inform you the status within 7 working days of receiving the product.
• On acceptance for product return, we will process your request for the refund within 7 working days.
• Refunds on the purchases made with the credit card will only be credited to the same card. Please allow one month billing cycle in order for your credit card to appear.
• International Shipping charges (for all items shipped outside UAE) will be deducted for all returns based on the applicable shipping charges.
Items bought through Promotional offers are not eligible for return.
Call our Customer Service Department on +9714 259 5447 or send a mail to
[email protected]
Include all original packaging and collateral material. 
Please provide at least the following information in your return request package.
• Online Order Number
• Reason for Return
• Your contact details
Be sure to ship your item fully insured, and request a return receipt for confirmation that your shipment has reached its destination. 
Return shipment charges will be bear by the sender and DIGI TECH will not be responsible for lost or damaged shipment
Please note that returns without any of the above information, uninsured or improperly packaged may not be accepted.
Attention: Digi Tech Trading LLC.
NO. 504, 5TH FLOOR, City Avenue Building
Deira Port Saied
Dubai, UAE
PO Box 22524 Dubai, UAE 
Tel: +9714 259-5447 
Following the above mentioned instructions will enable us to process your return effectively. 
If you have any questions about our return procedures, please contact us or call +9714 259 5447. Please note that return shipment charges would have to be borne by the sender.