• One-piece full cage protects the camera;
• Locks the camera via one 1/4in-20 screw and two side lock adapters;
• Accessory mounting points: 1/4in-20 threaded hole, 3/8in-16 threaded hole, ARRI 3/8in-16 locating hole, cold shoemount, 4. NATO rail, QD socket, hand/ shoulder strap hole, etc.;
• Built-in NATO rails for quick attachment of NATO clamp accessories
• Two 1/4in-20 threaded holes on the right side ensure stable vertical shooting
• Arca-Swiss quick-release plate supports Arca-type tripods or DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro stabilizers;

SmallRig NATO Cheese Handle 1688 is clamped onto a NATO-compatible rail and features 1/4"-20 and 3/8"-16 mounting holes for connecting accessories, as well as a single 15mm rod port. Moreover, the integrated shoe mounts at both ends are attached with shoe mount style accessories, such as LED lights, microphones etc. The handle comes with the hole pattern for ARRI accessory mount pins. Meanwhile, the exquisitely design with an array of mounting points makes the grip convenient. Except for sliding forwards and backwards on the NATO rail to keep your camera balance, the handle could be adjusted back and forth for the balance position of your rigs. This handle is ideal for low-mode shooting and your camera.

Key Features:

1. It is made up of a ballhead with 1/4’’ screw, a ballhead with NATO clamp and a ballhead clamp.

2. It could attach plate with 1/4’’-20 threaded holes, such as Top Plate 1853, Side Plate 1854 or cage with 1/4’’-20 threaded holes, like a6500 Cage 1889 on the one end via ballhead with 1/4’’ screw, while it could also attach monitor with NATO rail with on the other end via ballhead with NATO clamp. 

3. It could attach cage with NATO rail with on the other end via ballhead with NATO clamp, while it could attach monitor cage on the other end via ballhead with 1/4’’ screw.

SmallRig Battery Back 1547 allows mounting of Anton Bauer QRC, Switronix, RED, Blueshape ect. It mounts to standard 15mm rods with 15mm rod clamp(60mm apart). All necessary screws and spanners are included.

• Holds Power Banks from 2.09 to 3.43"
• Multiple 1/4"-20 Threaded Mounting Holes
• Clamping Jaws are Lined with Rubber Pads
• Weighs a Mere 3.7 Ounces

Designed for DJI RS 2/RSC 2.
Features 1/4”-20 & ARRI 3/8”-16 & cold shoe accessory mounts.
Clamps to the side of RS 2/RSC 2 via quick-release NATO clamp.
Anti-removal stud to secure the accessory from falling by accident.
Compatible with original DJI RS 2 smartphone mount.
Matte surface perfectly matches with the industrial design of gimbal.

Work with SmallRig RS 2 Quick Release Plate 3031.
Attach focus motor to RS 2 gimbal.
Compatible with DJI RS 2 focus rod mount, allowing for follow focus and zoom together.
Locks via thumbscrew which is secure and fast.
Equipped with 12-15mm rod clamp adapter to fit focus motor with 12mm or 15mm rod clamp.
The rod mount is horizontally adjustable with a range of 16mm to fit the lens of different diameters.

Designed for DJI Ronin S/SC.
Built-in 1/4”- 20 threaded hole.
Compatible with DJI and SmallRig RS 2/RSC 2 accessories which equipped with NATO port.
Secures to two sides of the gimbal by two M4 captive screws.

• Mount a 5 to 7" Monitor up to 3.3 lb
• 146° Tilt, 1/4"-20 Monitor Screw
• 3/8"-16 Screw with ARRI Anti-Twist Pins
• Rubber Padding to Protect Monitor

• For SmallRig Sony a7S III Camera Cage
• Prevents HDMI Cable Pulls & Disconnects
• One Easy-Grasp Knurled 1/4"-20 Screw
• 1/4"-20 Screw Mount with Anti-Twist Pins
• Durable Aluminum Construction

• NATO Rails on Top & Bottom
• 1/4"-20, 3/8"-16 & ARRI-Style Threads
• Supports Sun Hood & Master Caddy II
• HDMI Cable Clamp Included
• Neck Strap Slots
• Supports Optional 2nd HDMI Cable Clamp
• Lightweight Aluminum Alloy Design

• For SmallRig / Atomos Ninja V Cage
• Hook-and-Loop Attachment
• Made of Nylon