•  Powerful suction force that lasts 24 hours; load capacity of 50 kg;
• Multiple accessory mounting points, including 1/4in-20 threaded holes and ARRI 3/8in-16 locating holes.

• One-piece full cage protects the camera;
• Locks the camera via one 1/4in-20 screw and two side lock adapters;
• Accessory mounting points: 1/4in-20 threaded hole, 3/8in-16 threaded hole, ARRI 3/8in-16 locating hole, cold shoemount, 4. NATO rail, QD socket, hand/ shoulder strap hole, etc.;
• Built-in NATO rails for quick attachment of NATO clamp accessories
• Two 1/4in-20 threaded holes on the right side ensure stable vertical shooting
• Arca-Swiss quick-release plate supports Arca-type tripods or DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro stabilizers;

SMALLRIG EOS C100/C300/C500 Mark II Hot Shoe Kit 1669, this kit is consist of an easy top plate, a quick release safety rail and a C100 & C100 Mark II hot shoe.

SmallRig QR Half Cage for Blackmagic Design Pocket Cinema Camera 4K CVB2255

QR Baseplate 2267 for BMPCC 4K cage now is available to place an order.

Key Features:

1.A dedicated form-fitting cage for BMPCC 4K;

2.Built-in Manfrotto 501PL plate in the cage allowing quick release of camera in 2 seconds;

3.Multiple mounting interfaces (NATO rails, 1/4’’-20 and 3/8’’-16 threaded holes, ARRI locating holes and cold shoe) for attaching accessories;

4.Form-fitting design with unobstructed camera grip, button, port, venting and battery access.

5.Compatible with SmallRig Mount for Samsung T5 SSD, HDMI & SSD Cable Clamp and Lens Mount Adapter Support.

SmallRig NATO Cheese Handle 1688 is clamped onto a NATO-compatible rail and features 1/4"-20 and 3/8"-16 mounting holes for connecting accessories, as well as a single 15mm rod port. Moreover, the integrated shoe mounts at both ends are attached with shoe mount style accessories, such as LED lights, microphones etc. The handle comes with the hole pattern for ARRI accessory mount pins. Meanwhile, the exquisitely design with an array of mounting points makes the grip convenient. Except for sliding forwards and backwards on the NATO rail to keep your camera balance, the handle could be adjusted back and forth for the balance position of your rigs. This handle is ideal for low-mode shooting and your camera.

Key Features:

1. It is made up of a ballhead with 1/4’’ screw, a ballhead with NATO clamp and a ballhead clamp.

2. It could attach plate with 1/4’’-20 threaded holes, such as Top Plate 1853, Side Plate 1854 or cage with 1/4’’-20 threaded holes, like a6500 Cage 1889 on the one end via ballhead with 1/4’’ screw, while it could also attach monitor with NATO rail with on the other end via ballhead with NATO clamp. 

3. It could attach cage with NATO rail with on the other end via ballhead with NATO clamp, while it could attach monitor cage on the other end via ballhead with 1/4’’ screw.

SmallRig Handgrip Rosette Adapter 1887 for Sony PXW-FS7/FS7II
This adapter simply transforms the handgrip socket of Sony PXW-FS7/FS7II to an ARRI rosette.
You can also put it on camera cages with 1/4” screws.
Comes with M6 threaded holes compatible with both male and female threads.

SmallRig Battery Back 1547 allows mounting of Anton Bauer QRC, Switronix, RED, Blueshape ect. It mounts to standard 15mm rods with 15mm rod clamp(60mm apart). All necessary screws and spanners are included.

1. Deft and exquisite;
2. Form fiting to Metabones Adapter;
3. Adjustable by Metabones's size.

• For SmallRig 2203, 2254, and 2255 Cages
• Clamps Both HDMI and USB Type-C Cables

• Add Accessories to Your DJI Ronin-SC
• Multiple 1/4"-20 and 3/8"-16 Threads
• 3/8"-16 Anti-Twist Accessory Threads
• Rubber Padding Protects Gimbal