Search results for: 'SDI converter'
Search In
Video
215
Studio & Production
209
Converters
193
Production Switchers
13
Digital Cine Cameras
3
Audio
3
Computer Video Hardware
3
Recorders & Accessories
2
Monitors & Recorders
2
Production recording system
1
-
Aja
AJA 3G-SDI Frame Synchronizer with DashBoard Support
- openGear compatible card
- Utility frame sync function times input signals to an external reference
- Supports bi-level and tri-level references
- High quality 10-bit video processing
- Low latency processing, nominal video delay of 1 frame
- Freeze (on input signal loss) to black or last good frame
- Synchronizes 3G, HD and SD video formats
- Simultaneous SDI and HDMI outputs
OG-FS-MINI -
Aja
AJA openGear Ultra HD 4K/2K/HD/SD HDMI 2.0 to 3G-SDI Conversion with DashBoard Support
- openGear compatible card
- Supports HDMI 2.0 up to 60p at 4:4:4, 4:2:2, and 4:2:0
- Supports quadrant (square division) and 2SI (two sample interleave) 4K/UltraHD SDI mapping
- 4x 3G-SDI outputs
- Controlled by DashBoard network control software
- HD resolutions supported
- HDR Infoframe analysis with AJA DashBoard
- Embedded audio support
- Compatible with OGX, OG3 and DFR-8321 openGear frames
- Five year warranty
OG-HA5-4K -
Aja
AJA 3G-SDI to HDMI 2.0 Conversion Card with DashBoard Support
- openGear compatible card
- 4x 3G-SDI inputs
- Support for 4:2:2/4:4:4 HDMI 2.0 output
- Controlled by DashBoard network control software
- HD conversion supported
- HDR support for HDR 10 and HLG
- Embedded audio support
- Use with openGear 2RU frames including AJA’s OG-3-FR frame
- Five year warranty
OG-Hi5-4K-Plus -
Aja
AJA HDMI to SDI with Region of Interest Scaling. Dashboard Support
- HDMI to 3G-SDI scan conversion
- Region of Interest scaling
- HDMI input with loop-through
- 3G-SDI output
- Aspect ratio conversion and image rotation
- Genlock input
- Audio embedding
- Configure via Dashboard
- Compatible with OGX, OG3 and DFR-8321 openGear frames
- Five year warranty
OG-ROI-HDMI -
Aja
AJA 3G-SDI 8-Channel 24-Bit AES EmbedderWith Disembedder Card
- Video Formats: 3G-SDI
- 3G-SDI Embedder / Disembedder in one board
- Input: 1x 3G-SDI BNC
- Outputs: 1x 3G-SDI BNC
- 4x AES BNC (2 channels per input)
- Local and Remote modes
- Incoming embedded audio passed, removed, or overridden
- Configure via openGear DashBoard, or DIP switch
- Power: 5.0 watts
- Hot swappable
- Compatible with OGX, OG3 and DFR-8321 openGear frames
OG-3G-AMD -
Aja
AJA 1-Channel 3G-SDI To Single Mode LC Fiber Transmitter With Dashboard Support
- Video Formats: 150 Mbps - 3 Gbps, format agnostic
- Inputs: 1x 3G-SDI with SDI Loop out
- Outputs: 1x 3G-SDI BNC; 1x Single Mode LC Fiber
- Monitor via openGear DashBoard
- Input Present and Input SMPTE Lock LEDs
- Automatic detection and reclocking
- 270 Mbps, 1.483 Gbps, 1.485 Gbps, 2.966 Gbps, 2.970 Gbps - Auto Select
- Nominal Wavelength: 1310 nm
- Power: 2.5 watts
- Hot swap capable
- Compatible with OGX, OG3 and DFR-8321 openGear frames
OG-FIDO-T -
Aja
AJA 1-Channel 3G-SDI/LC Single Mode LC Fiber Transceiver With Dashboard Support
- Video Formats: 150 Mbps - 3 Gbps, format agnostic
- Inputs: 1x 3G-SDI BNC; 1x Single Mode LC Fiber
- Outputs: 1x 3G-SDI BNC; 1x Single Mode LC Fiber
- Monitor via openGear DashBoard
- Input Present and Input SMPTE Lock LEDs
- Automatic detection and reclocking
- 270 Mbps, 1.483 Gbps, 1.485 Gbps, 2.966 Gbps, 2.970 Gbps - Auto Select
- Nominal Wavelength: 1260-1620 nm
- Power: 2.5 watts
- Hot swap capable
- Compatible with OGX, OG3 and DFR-8321 openGear frames
OG-FIDO-TR -
Aja
AJA 2-Channel 3G-SDI To Single Mode LC Fiber Transmitter With Dashboard Support
- Video Formats: 150 Mbps - 3 Gbps, format agnostic
- Inputs: 2x Independent 3G-SDI Inputs, BNC connectors
- Outputs: 2x Independent single mode optical fiber, LC connectors
- Monitor via openGear DashBoard
- Input Present and Input SMPTE Lock LEDs
- Automatic detection and re-clocking
- 270 Mbps, 1.483 Gbps, 1.485 Gbps, 2.966 Gbps, 2.970 Gbps - Auto Select
- All other rates are passed through and not reclocked
- Wavelength: 1260-1620 nm
- Optical Power: -5dBm (min), 0dBm (max)
- Power: 2.5 watts
- Hot-swap capable
- Compatible with OGX, OG3 and DFR-8321 openGear frames
OG-FIDO-2T -
Aja
AJA 1-Channel 3G-SDI/LC Multi-Mode LC Fiber Transceiver With Dashboard Support
- Video Formats: 150 Mbps - 3 Gbps, format agnostic
- Inputs: 1x3G-SDI BNC; 1x Multi-Mode LC Fiber
- Outputs: 1x 3G-SDI BNC; 1xl Multi-Mode LC Fiber
- Monitor via openGear DashBoard
- Input Present and Input SMPTE Lock LEDs
- Automatic detection and reclocking
- 270 Mbps, 1.483 Gbps, 1.485 Gbps, 2.966 Gbps, 2.970 Gbps - Auto Select
- Nominal Wavelength: 850 nm
- Power: 2.5 watts
- Hot swap capable
- Compatible with OGX, OG3 and DFR-8321 openGear frames
OG-FIDO-TR-MM