Search results for: '38 microphones p 2'
- Related search terms
- microphones+microphone 1478
- microphones+micro 1477
- microphones+mic 1476
- microphones+microphone+ 1476
- microphones microphones 1476
-
Tilta
Tilta Advanced Camera Cage Kit for RED V-RAPTOR (V-Mount)
- Cage Kit for RED V-RAPTOR
- 1/4"-20 and 3/8"-16 Threads
- I/O Module, V-Mount Battery Plate
- Maintains Access to Camera Controls
- Cold Shoe Mounts, NATO Rail
- 15mm Rods, Rosette Mount
- Top Handle, Side Rod Holders
- Rear Top Plate with Exhaust Vents
- 15mm Baseplate
- Aluminum and Steel Construction
ESR-T08-B-V -
Canon
Canon CR-N500 Professional 4K NDI PTZ Camera with 15x Zoom (Satin Black)
- 1" CMOS Sensor with Dual-Pixel AF
- Capture up to UHD 4K30 / 1080p60 Video
- HDMI, 3G-SDI & IP Video Output
- Built-In NDI|HX Support, 15x Zoom, PoE+
- Built-In ND Filters: 1/4, 1/16, 1/64
- Genlock, Dual XLR & 3.5 Audio Input
- Canon DIG!C DV6 Processor, 1.5 Lux
- IP, RS-422, IR, and Wi-Fi Control
- Works with Canon Control Software
- Compatible with Canon PTZ Controller
4839C001 -
SmallRig
SmallRig NATO Cheese Handle 1688
SmallRig NATO Cheese Handle 1688 is clamped onto a NATO-compatible rail and features 1/4"-20 and 3/8"-16 mounting holes for connecting accessories, as well as a single 15mm rod port. Moreover, the integrated shoe mounts at both ends are attached with shoe mount style accessories, such as LED lights, microphones etc. The handle comes with the hole pattern for ARRI accessory mount pins. Meanwhile, the exquisitely design with an array of mounting points makes the grip convenient. Except for sliding forwards and backwards on the NATO rail to keep your camera balance, the handle could be adjusted back and forth for the balance position of your rigs. This handle is ideal for low-mode shooting and your camera.
1688 -
SmallRig
SmallRig “Black Mamba” Cage for Canon EOS R10 4004
1. Bionically designed, streamlined, and form-fitting full cage that protects the camera.
2. Maintains full access to top controls of the camera.
3. Three-point locking prevents twists.
4. 1/4"-20 threaded holes, ARRI 3/8" -16 locating hole, cold shoe mounts, etc. for various expansion solutions.
5. Arca-Swiss quick release plate at the bottom for directly mounting onto DJI RS 2 / RSC 2 stabilizer or Arca-Swiss tripod.
4004 -
SmallRig
SmallRig Camera/Camcorder Action Stabilizing Universal Handle 1984
SmallRig Camera/Camcorder Action Stabilizing Universal Handle 1984 is a universal top mounting handle for moving shoots. It bolts on to two 1/4’’-20 holes spaced 36mm apart center for secure camera carrying. Two shoe mounts are found on the top and at the back for attaching on cameras lights and microphones. Accessories can be attached using the multiple 1/4’’-20 and 3/8’’-16 holes in standard spacing and two Arri standard accessory mount. Additionally, we specially offer a 1/4’’ spanner for free access. It is quite convenient when you need to adjust the handle forwards and backwards for camera and rigs balance.
1984 -
Blackmagic Design
Blackmagic Design Cinema Camera 6K (Leica L)
- Full-Frame 6K HDR Sensor
- Up to 6K36 fps Open Gate / 4K Anamorphic
- Active Leica L Mount, OLPF Filter
- 13 Stops of Dynamic Range
- Dual 400/3200 Native ISOs
- Focus & Iris Control for Select Lenses
- 5" Tilting LCD Touchscreen
- CFexpress Type-B Card Recording
- 3D LUT & L-Mount Metadata Support
- HDMI, USB-C, 2 x Mini-XLR Audio Ports
CINECAM60KLFL -
SmallRig
SmallRig “Black Mamba” Cage for Canon EOS R7 4003
- Bionically designed, streamlined, and form-fitting full cage that protects the camera.
- Maintains full access to top controls of the camera.
- Three-point locking prevents twists.
- 1/4"-20 threaded holes, ARRI 3/8" -16 locating hole, cold shoe mounts, NATO rails, etc. for various expansion solutions.
- Arca-Swiss quick release plate at the bottom for directly mounting onto DJI RS 2 / RSC 2 stabilizer or Arca-Swiss tripod.
4003 -
SmallRig
SmallRig "Rhinoceros" Basic Cage Kit for Sony a7R V, a7 IV & a7S III
- Formfitting cage with a new streamlined design gives full access to buttons and ports.
- Made of ultra-light and high-strength carbon fiber, 20% lighter than an aluminum alloy kit and more suitable for handheld and low-angle shooting.
- A dedicated HDMI cable clamp protects interfaces to ensure stable signal transmission.
- Multiple accessory mounting points: 1/4"-20 threaded hole, ARRI 3/8"-16 locating hole, cold shoe mount, NATO rail, QD socket for attaching the handle, microphone, LED video light, monitor, etc.
- Arca-Swiss quick-release plate for Arca-Swiss tripods and DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbals.
3710 -
SmallRig
SmallRig Basic Cage Kit for Sony a7R V, a7 IV & a7S III
- Formfitting cage with a new streamlined design gives full access to buttons and ports.
- Made of ultra-light and high-strength carbon fiber, 20% lighter than an aluminum alloy kit and more suitable for handheld shooting.
- A dedicated HDMI cable clamp protects the interfaces to ensure stable signal transmission.
- Multiple accessory mounting points: 1/4"-20 threaded holes, ARRI 3/8"-16 locating holes, cold shoe mount, NATO rail, QD socket for attaching the handle, microphone, LED video light, monitor, etc.
- Arca-Swiss quick-release plate for Arca-Swiss tripods and DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbals.
3708 -
SmallRig
SmallRig Camera Cage for Canon EOS R6 Mark II
- One-piece full cage protects the camera;
- Locks the camera via one 1/4in-20 screw and two side lock adapters;
- Accessory mounting points: 1/4in-20 threaded hole, 3/8in-16 threaded hole, ARRI 3/8in-16 locating hole, cold shoemount, 4. NATO rail, QD socket, hand/ shoulder strap hole, etc.;
- Built-in NATO rails for quick attachment of NATO clamp accessories
- Two 1/4in-20 threaded holes on the right side ensure stable vertical shooting
- Arca-Swiss quick-release plate supports Arca-type tripods or DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro stabilizers;
4159 -
SmallRig
SmallRig SONY A7SIII Cage 3180D
- Dedicated cage for Sony Alpha 7S Ⅲ with seamless design and ultimate fitness.
- Features NATO rails, a cold shoe mount, and multiple 1/4”-20, 3/8"-16 threaded holes.
- Locks the camera with two screws to prevent twisting.
- Made of magnesium-aluminum alloy material, weight reduced by 40%.
- Protects the HDMI port of the camera.
3180D -
SmallRig
SmallRig “Retro” Cage for FUJIFILM X100VI 4557
- Formfitting Cage for FUJIFILM X100VI
- "Retro" Style to Match Camera
- Multiple 1/4"-20 and 3/8"-16 Threads
- Includes Custom Hot Shoe Cover
- Includes Custom Shutter Release Button
- Integrated Arca-Type Plate
- Shoe Mount, Strap Slots
- Maintains Access to Controls and Battery
- 1/4"-20 Screw, Padding, and Side Lock
- Durable Aluminum Construction
4557