Tilta Hydra Alien Car Mounting System Pro Kit (V-Mount)

SKU
HDA-T02-A-V
  • 16.5 lb Load Capacity
  • Shock-Absorbing Arm
  • Remote Kit for RS2
  • 8 x Installation Modes
  • 110 lb Suction Cup... Read More
AED 7,245.00 AED 6,900.00
Pre-Order to secure your piece
Orders shipped within 3 business days.

Secure Checkout with...

Tilta HDA-T02 Overview

Fast to set up with eight mounting modes to attach it to your car, the Hydra Alien Car Mounting System Pro Kit from Tilta is a flexible shock-absorbing system for your camera on the DJI RS2 system. Featuring a V-mount battery plate for power, you can mount the Hydra Alien at virtually any angle as its suction cup supports up to 110 lb, creating a strong seal. The shock-absorbing silicone rubber cup helps protect the surface of your vehicle.

The included remote kit provides you full control over the RS2, including start/stop, either wirelessly or by wire from inside the car, and the included monitor bracket simplifies your monitoring situation. This system supports any gimbal that can mount via 1/4"-20 screws and power via D-Tap. The Remote Control Handle only supports the RS2. The system packs neatly into the included transport case.

Note:
CAUTION: Tilta does not recommend using the suction cups on wrapped vehicles due to suction issues related to direct sunlight and heat.
The Hydra Alien Car Mounting System was designed from the ground up to work in conjunction with smaller gimbals to allow for a lightweight solution to car-mounted cinematography.
  • Quick assembly
  • Durable and lightweight
  • Folding dovetail plate
  • Run/stop functionality
  • Flexible assembly
The Pro Kit features the Remote Control Kit that offers full wired or wireless control of the DJI RS 2 and includes the Hydra Alien Monitor Bracket, making it easier to monitor your footage while controlling the RS 2. It also includes a thumbstick that allows you to control the pan and tilt of your gimbal for maximum precision while operating.
Custom-made power supply baseplate and side holding bracket for RS 2 provide additional protection for your camera during high-speed driving and bumpy shooting conditions.
Various and flexible mounting options. Supports high and low shooting angles. Compatible with a wide range of car types and complex mounting surfaces.
The system also uses a shock-absorbing arm to better stabilize the camera for certain shots as well as a spring-loaded cradle head if the intended shot requires that the gimbal be flipped upside down.
The newly included Hydraulic Dampening Pole further stabilizes the arm to provide smoother results when driving conditions are less than optimal.
get real warranty on Tilta Hydra Alien Car Mounting System Pro Kit (V-Mount) at Digi Tech Trading LLC
It's always easy to shop for Tripods, Supports at Digi Tech Trading LLC because you can browse by best sellers, brand, price range, customer rating, or special offers. And you can take advantage of free shipping within UAE. Digi Tech Trading LLC Tilta Hydra Alien Car Mounting System Pro Kit (V-Mount) - your trusted source of filmmaking equipments
Write Your Own Review
You're reviewing:Tilta Hydra Alien Car Mounting System Pro Kit (V-Mount)
Your Rating

Tilta HDA-T02 Specs

General
Compatibility DJI Ronin RS 2
Power
Power Source Battery (Not Included)
Battery Type 1 x V-Mount
Physical
Mounting Multiple x Suction Cups
Material of Construction Aluminum
Cable Length Not Specified by Manufacturer
Dimensions 2.7 x 1.1 x 0.6' / 83 x 33 x 17 cm
Weight 14.3 lb / 6.5 kg
Packaging Info
Package Weight 41.5 lb
Box Dimensions (LxWxH) 38.25 x 17 x 7"
  • Tilta Hydra Alien Car Mounting System Pro Kit (V-Mount)
  • Hydra Alien Dovetail Plate L1
  • Hydra Alien Dovetail Plate L2
  • Hydra Alien Dovetail Plate L3
  • Hydra Alien Dovetail Plate L4
  • Hydra Alien Dovetail Connector Plate
  • Hydra Alien Large Suction Cup
  • 2 x Hydra Alien Small Suction Cup
  • Hydra Alien Shock-Absorbing Arm with Hydraulic Damping Pole
  • Tilta Power Supply Base Plate for Select DJI Gimbals
  • 8 x Counterweight (7.7 oz)
  • Hydra Alien Cable Clamp Suction Cup Set
  • Hydra Alien Tool Kit
  • Safety Belt
  • Hydra Dual Battery Plate Cradle Head
  • Hydra Alien V-Mount Battery Plate
  • Hydra Alien 90-Degree Adapter for Shock-Absorbing Head
  • Hydra Alien Shock-Absorbing Head
  • Hydra Alien Dual Battery Plate Support Bracket
  • Hydra Alien Monitor Bracket
  • Remote Control Handle for RS 2/Ronin S
  • Remote Control Receiver Module for RS 2
  • 6-Pin to 6-Pin LEMO Cable
  • Hydra Alien Car Mounting Hard-Shell Waterproof Safety Case
  • Limited 1-Year Warranty on Electronic Components
  • Limited 2-Year Warranty on Mechanical Components

SHIPMENTS AND RETURNS

YOUR PACK SHIPMENT

Packages are generally dispatched within 3 working days after receipt of payment and are shipped via Courrier.

If you prefer delivery by UPS Extra with required signature, an additional cost will be applied, so please contact us before choosing this method. Whichever shipment choice you make, we will provide you with a link to track your package online.

Shipping fees free for orders above 300 AED within UAE , for international shipping please contact us before placing your order

RETURN POLICY 

FOR ONLINE PURCHASES ONLY
NOTE: - THIS POLICY IS ONLY APPLICABLE FOR ONLINE ORDERS AND DOES NOT APPLY IN DIGI TECH Office
• Articles are accepted for return in case of any manufacturing defect if returned in an unused condition within 10 days from the date of delivery.
• You may return any article subject to our acceptance on the condition that it was not worn, damaged, resized, engraved or altered.
• On receipt of the product, our quality assurance department will review the condition and make a declaration of acceptance or non acceptance.
• On the basis of the declaration, we will inform you the status within 7 working days of receiving the product.
• On acceptance for product return, we will process your request for the refund within 7 working days.
• Refunds on the purchases made with the credit card will only be credited to the same card. Please allow one month billing cycle in order for your credit card to appear.
• International Shipping charges (for all items shipped outside UAE) will be deducted for all returns based on the applicable shipping charges.
EXCLUSIONS
Items bought through Promotional offers are not eligible for return.
HOW TO PROCEED WITH YOUR RETURN
Call our Customer Service Department on +9714 259 5447 or send a mail to
[email protected]
Include all original packaging and collateral material. 
Please provide at least the following information in your return request package.
• Online Order Number
• Reason for Return
• Your contact details
INSURE YOUR PACKAGE 
Be sure to ship your item fully insured, and request a return receipt for confirmation that your shipment has reached its destination. 
Return shipment charges will be bear by the sender and DIGI TECH will not be responsible for lost or damaged shipment
Please note that returns without any of the above information, uninsured or improperly packaged may not be accepted.
ALL RETURN PACKAGES TO BE MAILED TO:
Attention: Digi Tech Trading LLC.
NO. 504, 5TH FLOOR, City Avenue Building
Deira Port Saied
Dubai, UAE
PO Box 22524 Dubai, UAE 
Tel: +9714 259-5447 
Following the above mentioned instructions will enable us to process your return effectively. 
If you have any questions about our return procedures, please contact us or call +9714 259 5447. Please note that return shipment charges would have to be borne by the sender.