Sound Devices 664 Six-Channel Portable Production Mixer with Integrated Recorder

SKU
664
  • 6 Low-Noise Balanced XLR Inputs
  • Selectable Phantom Power +12V or +48V
  • Direct Output on Each Channel
  • Records to CompactFlash and SD... Read More
AED 19,286.40 AED 18,368.00
In stock
Orders shipped within 3 business days.

Secure Checkout with...

Sound Devices 664 Overview

The 664 Six-Channel Portable Production Mixer with Integrated Recorder from Sound Devices has an unprecedented amount of functionality from a unit that can be battery operated. It starts with a low-noise, transformerless preamplifier section, continues to an intuitive mixing surface, adds a host of digitally-controlled routing features, allows room for analog inserts and aux busses, and finally terminates with versatile, plentiful output connectivity. By the way, the 664 can be configured to record digital audio to CompactFlash or an SD Card from any point in that signal flow.

The Sound Devices 664 has an input board that features six balanced XLR connections. Within the firmware, they can be selected to accept microphone or line level signals. Additionally, inputs 1 and 6 can configured to accept AES digital signals. Each channel has a direct output on an independent TA3 connector. There is also an input for a slate microphone, if you don't wish to use the 664's internal slate mic. Two headphone outputs are also provided.

The physical mixing surface of the 664 has the basic features you'd expect, such as trim pots, panning and level knobs. But it also has more advanced features, like sweepable high-pass filters and pre-fader listen switches on each channel.

The 664 has very flexible routing options within its LCD-based menu. When a channel's pre-fader listen switch is pushed to the right, it brings up that channel's menu options. Input level, pre/post track routing, aux buss routing, mix routing and polarity can all be adjusted. Channels can be paired in left/ride or mid/side modes. Phantom power can also be engaged at either 48V or 12V.

The Sound Devices 664 has many output options, from its balanced XLR main outputs to the unbalanced 1/8" stereo tape output. It can even send and receive word clock and timecode signals. Two Aux outputs on TA3 connectors allow custom track groups to be routed to external devices. The outputs can even be set to send AES digital signals of each buss and channel.

The 664 has an integrated recording system that tracks WAV files at up to 24-bit/48.048kHz resolution to CompactFlash or SD cards. The whole device can be powered by five AA batteries or an optional DC adapter.

 

Note:

Please note that not all memory cards are approved to work with this device. Please check manufacturer's website for a list of approved cards.

Sound Devices 664 - Additional Features

  • Dedicated COM send/return

  • Three camera audio returns

  • Dual headphone jacks

  • USB type B port for keyboard connection

  • X1 and X2 aux busses

  • Transflective LCD screen

  • Metalized, gasketed carbon fiber chassis

get real warranty on Sound Devices 664 Six-Channel Portable Production Mixer with Integrated Recorder at Digi Tech Trading LLC
It's always easy to shop for Audio Recorders at Digi Tech Trading LLC because you can browse by best sellers, brand, price range, customer rating, or special offers. And you can take advantage of free shipping within UAE. Digi Tech Trading LLC Sound Devices 664 Six-Channel Portable Production Mixer with Integrated Recorder - your trusted source of filmmaking equipments
Write Your Own Review
You're reviewing:Sound Devices 664 Six-Channel Portable Production Mixer with Integrated Recorder
Your Rating

Sound Devices 664

Connectivity
Inputs 6 x XLR balanced - Mic/Line
1 x TA3 - Slate Mic In
AES Digital Audio Inputs XLR inputs 1 and 6 can accept AES3 or AES42 signals (10V power), SRC
Return 1 x 1/8" TRS stereo input - Return B
Outputs 2 x XLR balanced - Master Outs L/R (Can also send AES3 digital signals)
2 x TA3 balanced - X1 and X2 (Line, -10, or Mic)
2 x TA3 balanced - Balanced Outs (Line, -10, or Mic level)
6 x TA3 balanced - Direct Outs
Other Connectors 2 x 10-pin connector
Each has a pair of transformer-isolated outputs and a stereo unbalanced Return input. Output levels are selectable between Line, -10, and Mic
Headphone Outputs 1 x 1/4" TRS stereo
1 x 1/8" TRS stereo mini
COM Ports 1 x TA3 - COM Send
1 x TA3 - COM Return
Word Clock I/O 1 x 5-pin LEMO connector - Timecode I/O
1 x BNC - Word Clock In
1 x BNC - Word Clock Out
Link Input/Output 1 x 5-pin connector (links to Sound Devices 664, 552, 302, 442, or MixPre mixers)
Stereo Tape Outputs/Type 1 x TA3 stereo unbalanced tape level output
1 x 1/8" TRS stereo unbalanced tape level output
Compact Flash Slot Compatible with Type I and Type II cards; high-speed UDMA cards are recommended for higher track count recording
SD Card Slot Accepts SD / SDHC / SDXC cards, high-speed class 10 cards are recommended
Please see manufacturer's site for a list of approved cards
USB Port 1 x USB type B (for factory use and keyboard connection with adapter)
Performance
Input Impedances XLR Mic: 4kΩ : for use with ≤ 600Ω mics
XLR Line: 10kΩ : for use with ≤ 2kΩ outputs
Returns: 30kΩ : for use with ≤ 2kΩ outputs
Maximum Input Level XLR Mic: 0 dBu (0.78 Vrms)
XLR Line: +40 dBu (80 Vrms)
Returns: +24 dBu (12.4 Vrms)
High-Pass Filter Sweepable 80 Hz to 240 Hz, -12 dB/oct @ 80 Hz, -6 dB/octave @ 240 Hz
Limiter Individual input limiters on both trim and fader stages
+16 dBu threshold, 20:1 limiting ratio, 1 mS attack time, 500 mS release time
Output Impedances Line: 100Ω : for use with ≥ 600Ω inputs
-10: 3.2kΩ : for use with ≥ 10kΩ inputs
Mic: 150Ω : for use with ≥ 600Ω inputs
Clipping Level Line Outputs: (1% THD) 20 dBu minimum with 10k load
Maximum Output Level Line: +20 dBu (7.8 Vrms)
-10: +6 dBu (1.5 Vrms)
Mic: -20 dBu (0.078 Vrms)
Tape Outs: +6 dBu (1.5 Vrms)
Limiter Analog output limiter: threshold selectable from +4 dBu to +20 dBu, 1 dB steps, 20:1 limiting ratio, 1 mS attack time, 500 mS release time
Maximum Gain Mic-In-to-Line-Out: 93 dB
Mic-In-to-Aux-Out @ -10dBV: 79 dB
Line-In-to-Line-Out: 39 dB
Frequency Response 20 Hz to 50 kHz ±0.5 dB
THD + Noise 0.09% max (1 kHz, 22 Hz to 22 kHz BW, fader at 0, 0 dBu output)
Equivalent Input Noise -126 dBu (-128 dBV) max (22 Hz to 22 kHz bandwidth, flat filter, trim control fully up)
A/D - D/A Conversions
Recording Tracks 10 tracks (6 inputs, 4 output buses)
A/D Conversion 24-bit
Sampling Rates 44.1, 47.952, 48, 48.048 kHz
Dynamic Range (Typical) 114 dB, A-weighted
Digital Outputs AES3 transformer-balanced, in pairs; 1-2 XLR-L, 3-4 XLR-R, 5-6, multi-pin 1, 7-8, multi-pin 2, 110Ω, 2 V p-p, AES and S/PDIF compatible
File System Format FAT32 formatted, will format memory cards on-board, WAV (Broadcast Wave File format) polyphonic
Accuracy ± 0.2 ppm (0.5 frames per 24 hours)
Timecode Modes Supported: off, Rec Run, Free Run, 24h Run, External
Frame Rates: 23.976, 24, 25, 29.97DF, 29.97ND, 30DF, 30ND
Accuracy: Ambient Generator, 0.5 frames in 24 hr
Time Code Input: 20kΩ impedance, 0.3 V to 3.0 V p-p (-17 dBu to +3 dBu)
Time Code Output: 1kΩ impedance, 3.0V p-p (+12 dBu)
Word In/Out: square wave; 10k/75Ω, 1-5V p-p input; 75Ω, 3.3V p-p output, at SR
General
Power Supply Isolated 10-18 V on locking 4-pin Hirose connector (sold separately)
Battery Operable Accepts 5 x AA (LR6) batteries, 1.2 to 1.5V nominal (NiMH rechargeable compatible)
Operating Temperature Range -4 to 140°F (-20 to 60°C), up to 90% relative humidity
Storage Temperature Range -40 to 185°F (-40 to 85°C)
Dimensions (H x W x D) 2.1 x 12.6 x 7.8" (5.3 x 32 x 19.8 cm)
Weight 4.75 lb (2.15 kg)
Packaging Info
Package Weight 6.67 lb
Box Dimensions (LxWxH) 16.2 x 11 x 5.3"
  • Sound Devices 664 Six-Channel Portable Production Mixer with Integrated Recorder
  • Limited 2-Year Warranty.
  • Not in the Box 

    Batteries & Power (Not Included).

SHIPMENTS AND RETURNS

YOUR PACK SHIPMENT

Packages are generally dispatched within 3 working days after receipt of payment and are shipped via Courrier.

If you prefer delivery by UPS Extra with required signature, an additional cost will be applied, so please contact us before choosing this method. Whichever shipment choice you make, we will provide you with a link to track your package online.

Shipping fees free for orders above 300 AED within UAE , for international shipping please contact us before placing your order

RETURN POLICY 

FOR ONLINE PURCHASES ONLY
NOTE: - THIS POLICY IS ONLY APPLICABLE FOR ONLINE ORDERS AND DOES NOT APPLY IN DIGI TECH Office
• Articles are accepted for return in case of any manufacturing defect if returned in an unused condition within 10 days from the date of delivery.
• You may return any article subject to our acceptance on the condition that it was not worn, damaged, resized, engraved or altered.
• On receipt of the product, our quality assurance department will review the condition and make a declaration of acceptance or non acceptance.
• On the basis of the declaration, we will inform you the status within 7 working days of receiving the product.
• On acceptance for product return, we will process your request for the refund within 7 working days.
• Refunds on the purchases made with the credit card will only be credited to the same card. Please allow one month billing cycle in order for your credit card to appear.
• International Shipping charges (for all items shipped outside UAE) will be deducted for all returns based on the applicable shipping charges.
EXCLUSIONS
Items bought through Promotional offers are not eligible for return.
HOW TO PROCEED WITH YOUR RETURN
Call our Customer Service Department on +9714 259 5447 or send a mail to
[email protected]
Include all original packaging and collateral material. 
Please provide at least the following information in your return request package.
• Online Order Number
• Reason for Return
• Your contact details
INSURE YOUR PACKAGE 
Be sure to ship your item fully insured, and request a return receipt for confirmation that your shipment has reached its destination. 
Return shipment charges will be bear by the sender and DIGI TECH will not be responsible for lost or damaged shipment
Please note that returns without any of the above information, uninsured or improperly packaged may not be accepted.
ALL RETURN PACKAGES TO BE MAILED TO:
Attention: Digi Tech Trading LLC.
NO. 701, 7TH FLOOR, City Avenue Building
Deira Port Saied
Dubai, UAE
PO Box 22524 Dubai, UAE 
Tel: +9714 259-5447 
Following the above mentioned instructions will enable us to process your return effectively. 
If you have any questions about our return procedures, please contact us or call +9714 259 5447. Please note that return shipment charges would have to be borne by the sender.