Flat 10% discount On Hollyland Products. Use Coupon Code HL10

RED DSMC2 V-LOCK I/O EXPANDER

Out of stock
SKU
720-0045
AED 7,875.00 AED 7,500.00
Pre-Order to secure your piece
  • DC Power input
  • Auto Boot-Up on Power-On
  • 3G-SDI, HDMI 1.2 Output
  • Control & Sync Ports
  • USB Power Output
  • AUX Power Output
  • Stereo Analog Input
  • Stereo Headphone... Read More

RED DIGITAL CINEMA 720-0045 Overview

More than just a way to power your camera, the RED DSMC2 V-LOCK I/O Expander provides a variety of input/output connections in addition to a V-Lock mount for your DSMC2 camera. The Expander is made from magnesium, so it is lightweight yet strong. It enables powering your camera from a V-Mount battery or by an alternate DC source via cable, and you can set it to automatically boot your camera up once power is connected. It provides both 3G-SDI and HDMI outputs, as well as control and sync outputs.

Built-in USB and auxiliary power outputs enable powering accessories and limiting the number of power splitter and converter boxes hanging from your camera. Audio is not forgotten by RED, and the Expander features both an analog stereo input and a stereo headphone jack. It is compatible with the WEAPON 8K S35, WEAPON 6K, as well as the EPIC/SCARLET-W, and the RAVEN.

Auto Boot-Up on Power-On
The Expander features a physical switch that allows you to enable the camera to automatically boot up when power is applied. This is a useful feature for when the camera is in a difficult-to-access position.
Firmware
Since the V-Lock I/O Expander communicates with your camera, and allows electronic signals and video output, it requires that your DSMC2 camera has firmware v6.2.17 or later installed.
The Expander simplifies your power and output situation when shooting, and can be removed if you want your camera to have a smaller profile for stash-cam, gimbal, or drone shooting.
get real warranty on RED DSMC2 V-LOCK I/O EXPANDER at Digi Tech Trading LLC
It's always easy to shop for Digital Cine Cameras at Digi Tech Trading LLC because you can browse by best sellers, brand, price range, customer rating, or special offers. And you can take advantage of free shipping within UAE. Digi Tech Trading LLC RED DSMC2 V-LOCK I/O EXPANDER - your trusted source of filmmaking equipments
More Information
Manufacturer Red
Write Your Own Review
You're reviewing:RED DSMC2 V-LOCK I/O EXPANDER
Your Rating

RED DIGITAL CINEMA 720-0045 Specs

General
Material of Construction Magnesium
Mounting BRAIN: 4 x M4 mounting Screws
Interface Expander-to-BRAIN
Power delivery via rear pogo connector (13-pin)
Communication via rear I/O connector (4x40-pin)

Expander
DC In: 1 x 6-pin 1B LEMO socket
3G-SDI Output: 1 x 75 Ohm BNC, 60 Hz max frame rate
HDMI 1.2 Output: 1 x USB Type-A socket, 60 Hz max frame rate
Sync: 1 x 4-pin 00B LEMO socket (genlock in/timecode in/sync in)
Control: 1 x 4-pin 00B LEMO socket (tally out/RS-232 RX and TX)
USB Power Output: 1 x USB Type-A socket, 1.5 A
D-Tap Aux Power Output: 3.0 A
Microphone Input: 1 x 3.5 mm stereo jack
Headphone Output: 1 x 3.5 mm jack
Audio 24-bit, 48 kHz
Uncompressed
Unbalanced mic level
Environmental Operating
Temperature: 32 to 104°F / 0 to 40°C
Humidity: 0% to 85%, non-condensing

Storage
Temperature: -4 to 122°F / -20 to 50°C
Humidity: 0% to 85%, non-condensing
Firmware v6.2.17 or later.
Dimensions 4.57 x 4.94 x 2.25" / 11.61 x 12.55 x 5.72 cm
Weight 1.0 lb / 0.5 kg
Packaging Info
Package Weight 1.675 lb
Box Dimensions (LxWxH) 7.9 x 7.45 x 3.8"
  • RED DIGITAL CINEMA DSMC2 V-LOCK I/O Expander
  • Limited 1-Year Manufacturer Warranty
RED DSMC2 V-LOCK I/O EXPANDER