FREEFLY MOVI M15 3-Axis Motorized Gimbal Stabilizer

Out of stock
Pre-Order to secure your piece
  • Designed for Hand-Held Use
  • For Cinema Cameras & DSLRs up to 15 lb
  • Keeps Horizon Level & Counteracts Drift
  • Single and Dual Operator Control Modes
  • Supports DSMX and SBUS RC Transmitters
  • Wi-Fi Pairing with iOS, Android, PC Apps
  • Shot Recorder Remembers Camera Position
  • Fully Tool-Less Balancing
  • Two Batteries and a Charger Included

FREEFLY M15 Overview

The MOVI M15 3-Axis Motorized Gimbal Stabilizer from Freefly is a camera stabilization system that uses three motors and an IMU (inertial measurement unit) to detect and counteract unwanted movement along three axes: pan, tilt, and roll. In particular, it works to compensate for handshake or vehicle-induced vibration as well as reduce translation.

The M15 supports payloads up to 15 pounds, making it suitable for professional cinema cameras with lenses, as well as smaller camcorders and DSLRs. There is a quick-release adapter available separately so that it can be mounted on cranes, jibs, vehicles mounts, and other camera support equipment. The M15 is also Wi-Fi enabled, allowing for simple, wireless pairing with iOS, Android, and Windows apps.

The system supports single- or dual-operator control. In single user (Majestic) mode, the system's software intelligently differentiates unwanted shake or vibration from intentional movement, such as panning, while keeping the horizon level. Alternatively, you can have a dedicated operator (Stabilized Slew mode) with a remote control or RC transmitter who is in charge of camera pan, tilt--and if you want--roll. In this configuration, the camera will always point where the operator of the remote tells it to, independent of how the rig operator moves.

As with sled-style stabilizers, the camera should be balanced on the MOVI to ensure best performance. Once balanced, the MOVI pairs over Wi-Fi to an iOS, Android, or Windows app to finalize the configuration process.

Two lithium-polymer (LiPo) batteries and a charger are included, as well as a quick-release top handle for low-angle shooting or transporting the assembled rig on set.

Supported Cameras

The MOVI M15 is designed to support payloads up to 15 pounds, making it suitable for professional cinema cameras with cinema lenses, as well as smaller DSLR cameras. Cameras that have been tested on the system include the ARRI Alexa M, Sony F5/F55, RED Epic/Scarlet, Canon C500/C300/C100, Sony FS700 (with limited choice of lenses), and the Blackmagic Cinema Camera / Production Camera 4K.

Lightweight Construction

Because the weight of your camera setup and the M15 is supported by your arms, the M15 is built to be as light as possible to keep while maintaining structural rigidity and robustness.

Remote Operation

The MOVI can be operated remotely either with a dedicated controller or using an RC aircraft transmitter (hand-held radio controller). It supports Spektrum DSMX and Futaba SBUS transmitters with at least six channels, including the Spektrum DX7s. Wireless range will vary depending on the transmitter used.

Three Control Modes

  • Majestic Mode: For single-operator use. In this mode the gimbal provides stabilization without counteracting operator-directed camera movements--the camera goes where you point the handles. This mode is ideal for accurate framing in tight situations
  • Stabilized Mode: Assumes no operator input, compensating for all movement it detects. Ideal scenarios for this mode include when the gimbal is mounted to a car or shots where the camera is moving but the camera angle remains fixed
  • Slew Stabilized Mode: For dual-operator control. In this mode an operator with a dedicated remote or RC transmitter controls pan, tilt, and roll independently of the gimbal handler's movements.

Drift Free Horizon

The gimbal uses a GPS-assisted IMU that when used outdoors with available satellite signals is able to minimize drift even when under acceleration--such as where the camera is mounted on a UAV or vehicle.

Freefly Configurator

The Freefly Configurator is a GUI that gives you control of your MOVI via an iOS, Android, or Windows device over Wi-Fi pairing. n

Silent Drive

The motors driving the gimbal have been designed to operate as quietly as possible to ensure you will be able to record sound without picking up any unwanted noise.

Translation Compensation

Making hundreds of adjustments per second, the software works to counteract translation--the bobbing up and down effect while running--when tracking a moving subject moving at high speed. In this situation, translation may be unavoidable, but at least the subject will remain in-frame.

Shot Recorder

Keeps a record of the camera position (where GPS is available), height, camera pan, tilt, and roll so that the shot can be recreated later or to help Visual Effects align the live action shot with other elements in a CG composite.

Third-Party Mounting

Using separately available mounting hardware it is possible to mount the MOVI on cranes, jibs, Steadicams and similar vest-supported stabilizers (where it corrects for angular error), and other camera support hardware. It has also been verified to work on an Easyrig.

Remote Firmware Updatable

You can upgrade the gimbal to new software features as they are released by Freefly yourself, without having to send the device in for a factory update.

Custom Direct Drive Motors

The MOVI system uses motors that were custom made for the gimbal rather than re-purposing off-the-shelf parts.

User Adjustable "Shakey Cam"

Want an organic hand-held look? The MOVI provides variable noise filters that allow you to effectively dial in a custom amount of shake to help you achieve the effect you are after.

Additional Features

  • Custom designed, precisely calibrated sensors
  • Fully tool-less balancing
  • Second battery cage of holding a battery dedicated to powering accessories
  • Handles can be switch from low to high modes with flip of a lever
  • Quick-release top handle
get real warranty on FREEFLY MOVI M15 3-Axis Motorized Gimbal Stabilizer at Digi Tech Trading LLC
It's always easy to shop for Stabilizers & Gimbals at Digi Tech Trading LLC because you can browse by best sellers, brand, price range, customer rating, or special offers. And you can take advantage of free shipping within UAE. Digi Tech Trading LLC FREEFLY MOVI M15 3-Axis Motorized Gimbal Stabilizer - your trusted source of filmmaking equipments
More Information
Manufacturer Freefly


Electrical and Mechanical
System Type3-axis gyro stabilized
Pan Range360°
Tilt Range±180°
Roll Range±180°
Slew Rates0 to 150°/sec
InterfaceWi-Fi pairing to iOS/Android/Windows GUI
Control Modes
Majestic ModeStabilized with operator control via gimbal base
StabilizedStabilized image with no operator input
Stabilized SlewStabilized with remote operator
OffKills drive to gimbal axes
Capacity2.6 Ah
Voltage14.8 VDC
Maximum Continuous Discharge3 C (7.8 A)
Maximum Burst Discharge5 C (13 A)
Maximum Charge Voltage4.2 V per cell
Minimum Discharge Voltage3.0 V
Dimensions (LxWxH)3.9 x 1 x 1.2" / 10.0 x 2.5 x 3.0 cm
Weight7.1 oz / 200 g
PayloadMaximum: 15 lb / 6.8 kg
Power Requirements9 to 18 VDC (3S or 4S LiPo)
Dimensions (LxWxH)Camera Cage: 7.99 x 7.99 x 7.76" / 20.3 x 20.3 x 19.7 cm
Storage: Varies, depending on how system is broken down
Weight5.4 lb / 2.47 kg
Packaging Info
Package Weight11.2 lb
Box Dimensions (LxWxH)30.5 x 20 x 8.5"
  • FREEFLY MOVI M15 3-Axis Motorized Gimbal Stabilizer
  • 2 x LiPo Battery
  • LiPo Battery Charger with Leads
  • Dock for C-Stand
  • Top Handle
  • M2.5 Hex Driver
  • M3 Hex Driver
  • Limited 1-Year Warranty on Gimbal Hardware (Batteries not Covered)
FREEFLY MOVI M15 3-Axis Motorized Gimbal Stabilizer