BlackMagic HyperDeck Extreme Control

SKU
HYPERD/RSTEXCTR
  • Standard Deck Controls for up to 8 Decks
  • 8 x RS-422 Ports
  • Supports Legacy Decks and HyperDeck 8K
  • 3 RU, Half-Rack Width... Read More
AED 5,506.20 AED 5,244.00
pre-order to book your unit
Orders shipped within 3 business days.

Secure Checkout with...

Blackmagic Design HYPERD/RSTEXCTR Overview

The HyperDeck Extreme Control from Blackmagic Design is a 3 RU, half-rack width installation offering traditional deck controls for virtually any type of deck thanks to RS-422 connectivity. Eight RS-422 ports allow you to control up to eight decks, including legacy decks and the HyperDeck Extreme 8K HDR.

Controls include transport, timecode, and deck status buttons plus a large search dial for jog, shuttle, and positioning control. There is a row of eight recorder selection buttons and another row of eight player selection buttons. To protect videotape masters, recording requires pressing both the "REC" and "PLAY" buttons simultaneously. The HyperDeck Extreme Control also features a built-in editor for automating the ingest of legacy videotape-based programming.

Two HyperDeck Extreme Control units, or one unit plus one HyperDeck Extreme 8K HDR, can be installed in a rack or console using the optional HyperDeck Extreme Rack Kit.

Automate Editing between Tape and HyperDeck

The built-in editor allows deck-to-deck editing. Operating the same way as traditional decks, the HyperDeck Extreme Control can control legacy decks and the HyperDeck Extreme 8K HDR from the same front panel. To edit old videotape simply press the "PLAYER" button, enter in and out points on the tape, select the recorder, and press "EDIT". The HyperDeck Extreme Control will now cue and play the broadcast deck while recording on the HyperDeck.

Traditional and Elegant Transport Controls

You get familiar transport controls such as "PLAY" which, when pressed during a recording, will cause the recording to stop and the deck to continue to play from the same point. To start a recording, press both the "REC" and "PLAY" buttons simultaneously.

Premium Search Dial for Jog and Shuttle

The high-quality search dial features both jog and shuttle control and has an electronic clutch that stops the knob at the end of the shuttle travel or allows for free spinning when in jog. HyperDeck Extreme Control replaces varispeed with a position function that allows rapid movement up and down the recording. The search dial uses twin bearings so you can free spin it for fast jog.

Full Timecode Display and Deck Status

Full deck status is provided on a large timecode display. This display indicates the timecode of the current selected deck, and the timecode source switch will control what's displayed on the time counter. The horizontal light bar indicator allows the user to see the position of the search dial and provide a visual feedback, which is important when working with remote decks. The servo indicator light will show when the deck is in play or record mode and the servo system is correctly locked. Because remote decks will still display the time counter and transport state, the remote indicator will let you know if the deck is in remote. There's even external video reference status.

Flexible In and Out Point Entry for Editing

For editing, you need to enter an in and out point for the remote deck. Simply select the "IN" or "OUT" button and the "ENTRY" button simultaneously to enter the points. To display each edit point on the time counter display, simply press the "IN" or "OUT" button only and the time the point will be shown. While the entry button is used for entering the in or out point data, you can also clear the in and out points by pressing the "IN" or "OUT" button while pressing "DELETE". To trim edit points, you can press the "TRIM" + or - button while pressing the "IN" or "OUT" button, and you will advance or delay the edit point by one frame at each press.

Pre-Roll Edits to Cue Decks

A pre-roll button is provided for cueing decks. When this button is pressed, the tape machine will run to the pre-roll point, which is generally five seconds before the in point. If you are using an older broadcast deck, it could take a few minutes for the deck to get to the cue point as the machine has to spool the tape. If the "PREROLL" button is pressed simultaneously with the "IN" or "OUT" button, then the deck will cue to the specific in or out point.

Perform the Edit Automatically

Once you have your in and out points set, you can perform the edit automatically by pressing the "EDIT" button. If this button is pressed before setting the in point, the current tape position will be automatically entered as the in point, and then the editing will be performed. This means you can select the "EDIT" button and it will set the in point and then perform the edit all in one step.
get real warranty on BlackMagic HyperDeck Extreme Control at Digi Tech Trading LLC
It's always easy to shop for Production recording system at Digi Tech Trading LLC because you can browse by best sellers, brand, price range, customer rating, or special offers. And you can take advantage of free shipping within UAE. Digi Tech Trading LLC BlackMagic HyperDeck Extreme Control - your trusted source of filmmaking equipments
Write Your Own Review
You're reviewing:BlackMagic HyperDeck Extreme Control
Your Rating

Blackmagic Design HYPERD/RSTEXCTR Specs

Deck Control Outputs 8 x RS-422
Reference Input Tri-Sync or Black Burst
Reference Output Follows Reference Input
Ethernet 1 Gb/s
Computer Interface 1 x USB Type-C
Control Protocols Sony
Internal Software Upgrade Loaded at System Start or via Blackmagic HyperDeck Setup Using USB Port
Operating System Support Mac 10.13 High Sierra, 10.14 Mojave, or later
Windows 8.1 or 10
Display 8-Digit, 7-Segment LED Timecode Display
Power Supply 1 x Internal 100 - 240 VAC
1 x 4-Pin XLR 12 VDC
Operating Temperature 32 to 104°F / 0 to 40°C
Storage Temperature -4 to 113°F / -20 to 60°C
Relative Humidity 0 to 90% Non-Condensing
Rack Compatibility 3 RU, Half Rack Width
Dimensions 8.3 x 5.1 x 13.8" / 21 x 13 x 35 cm
Weight 3.5 lb / 1.6 kg
Packaging Info
Package Weight 8.025 lb
Box Dimensions (LxWxH) 17.2 x 10.9 x 8.2"
  • Blackmagic Design HyperDeck Extreme Control
  • SD Card with User Manual
  • Limited 1-Year Warranty

SHIPMENTS AND RETURNS

YOUR PACK SHIPMENT

Packages are generally dispatched within 3 working days after receipt of payment and are shipped via Courrier.

If you prefer delivery by UPS Extra with required signature, an additional cost will be applied, so please contact us before choosing this method. Whichever shipment choice you make, we will provide you with a link to track your package online.

Shipping fees free for orders above 300 AED within UAE , for international shipping please contact us before placing your order

RETURN POLICY 

FOR ONLINE PURCHASES ONLY
NOTE: - THIS POLICY IS ONLY APPLICABLE FOR ONLINE ORDERS AND DOES NOT APPLY IN DIGI TECH Office
• Articles are accepted for return in case of any manufacturing defect if returned in an unused condition within 10 days from the date of delivery.
• You may return any article subject to our acceptance on the condition that it was not worn, damaged, resized, engraved or altered.
• On receipt of the product, our quality assurance department will review the condition and make a declaration of acceptance or non acceptance.
• On the basis of the declaration, we will inform you the status within 7 working days of receiving the product.
• On acceptance for product return, we will process your request for the refund within 7 working days.
• Refunds on the purchases made with the credit card will only be credited to the same card. Please allow one month billing cycle in order for your credit card to appear.
• International Shipping charges (for all items shipped outside UAE) will be deducted for all returns based on the applicable shipping charges.
EXCLUSIONS
Items bought through Promotional offers are not eligible for return.
HOW TO PROCEED WITH YOUR RETURN
Call our Customer Service Department on +9714 259 5447 or send a mail to
[email protected]
Include all original packaging and collateral material. 
Please provide at least the following information in your return request package.
• Online Order Number
• Reason for Return
• Your contact details
INSURE YOUR PACKAGE 
Be sure to ship your item fully insured, and request a return receipt for confirmation that your shipment has reached its destination. 
Return shipment charges will be bear by the sender and DIGI TECH will not be responsible for lost or damaged shipment
Please note that returns without any of the above information, uninsured or improperly packaged may not be accepted.
ALL RETURN PACKAGES TO BE MAILED TO:
Attention: Digi Tech Trading LLC.
NO. 701, 7TH FLOOR, City Avenue Building
Deira Port Saied
Dubai, UAE
PO Box 22524 Dubai, UAE 
Tel: +9714 259-5447 
Following the above mentioned instructions will enable us to process your return effectively. 
If you have any questions about our return procedures, please contact us or call +9714 259 5447. Please note that return shipment charges would have to be borne by the sender.