Description

AKG P120 Overview

Whether you record vocals at home or mic up blaring guitar cabs and explosive drums on stage, the black AKG P120 condenser microphone is designed to give clear, distortion-free sound on a tight budget. This side-address mic sports a rugged all-metal body that not only bolsters durability, but also aids in rejecting RF interference from sources such as wireless systems. It comes with a stand adapter for straightforward mounting on your existing mic stand.

The low-mass 0.67" gold-sputtered diaphragm yields a detailed sound with a slight high-frequency rise above 10 kHz, and it is capable of handling SPLs up to 150 dB (-20 pad on) without audible distortion. A gentle low-cut filter at 300 Hz can be engaged, which helps reduce rumble, wind noise, or even bass buildup from up-close miking. Stage bleed and background noise are attenuated by the mic's cardioid polar pattern, which is most sensitive to sound in front of the microphone. Use a separately available XLR cable to connect the P120 to an XLR mic input that can supply 48V phantom power.

Cardioid Polar Pattern

This side-address microphone is most sensitive to sounds arriving from in front of it while picking up much less of sounds arriving from the sides or rear (from monitor speakers or neighboring instruments). This makes the microphone equally suited for recording and onstage use.

Gold-Sputtered Diaphragm

The 0.67" diaphragm—sized between the measurements of typical large and small diaphragms—is made of a plastic foil that is gold-sputtered on one side only to prevent shorting to the back electrode even at extremely high sound pressure levels.

All-Metal Body

The all-metal body adds to the rejection of RF interference so you can use the microphone near transmitter stations and along with wireless microphones or other communications equipment. The extremely rugged, heavy body and sturdy front grille protect the microphone from damage from tough handling on stage.

High Headroom and Minimum Distortion

Capable of handling sound pressure levels up to 150 dB without introducing perceptible distortion and built to resist high temperatures and humidity, the microphone will give excellent results in a wide range of applications.

Bass-Cut Filter

Selector 1 on the microphone front further reduces low-end distortion caused by footfall, wind noise, and air conditioning rumble. The filter also minimizes the proximity effect that close-in miking from less than 4" causes in any unidirectional microphone. The filter rolls off at 6 dB/octave from 300 Hz downward.

Switchable Pad

Selector 2 on the microphone front lets you increase the headroom by 20 dB for distortion-free recording up close. The pre-attenuation pad prevents the microphone's output level, particularly at low frequencies, from overloading the miniature transformers used in many mixer input stages, etc.

Connecting to Audio Equipment

The P120 uses a condenser transducer designed for 48V phantom powering from a source such as an external mic preamp, an audio interface, or a mixing console. It provides a balanced output on an XLR 3-pin male connector; use an XLR cable (available separately) to connect the microphone to a balanced XLR input with phantom power.

get real warranty on AKG P120 Cardioid Condenser Microphone (Black) at Digi Tech Trading LLC
It's always easy to shop for Live Sound Microphones at Digi Tech Trading LLC because you can browse by best sellers, brand, price range, customer rating, or special offers. And you can take advantage of free shipping within UAE. Digi Tech Trading LLC AKG P120 Cardioid Condenser Microphone (Black) - your trusted source of filmmaking equipments

Reviews

Write Your Own Review

You're reviewing: AKG P120 Cardioid Condenser Microphone (Black)

Your Rating:

Loading...

You submitted your review for moderation.

Technical Specification

AKG P120 Specs

Key Specs

Form Factor	Large Diaphragm Mic / Stand/Boom Mount
Element Type	Electret Condenser
Polar Pattern	Cardioid
On-Board Controls	High-Pass Filter, Pad
Frequency Range	20 Hz to 20 kHz
Maximum SPL	130 dB SPL 150 dB SPL (with Pad)
Analog Output	1x XLR 3-Pin Male (on Mic)
Power Sources	Phantom Power

Microphone

Primary Applications	Live Sound, Studio Recording, Broadcast
Form Factor	Large Diaphragm Mic / Stand/Boom Mount
Intended Sound Sources	Vocals, Speech/Voice-Over, Instruments
Sound Field	Mono
Element Type	Electret Condenser
Diaphragm	0.67" / 17.02 mm
Polar Pattern	Cardioid
Orientation	Side Address
Circuitry	Solid-State
Pad	-20 dB
High-Pass Filter	300 Hz, 6 dB/Octave
On-Board Controls	High-Pass Filter, Pad

Performance

Frequency Range	20 Hz to 20 kHz
Maximum SPL	130 dB SPL 150 dB SPL (with Pad)
Off-Axis Rejection	3 dB at 60° 12 dB at 120° 20 dB at 180°
Impedance	200 Ohms
Load Impedance	≥ 1000 Ohms
Sensitivity	-32.5 dBV
Signal-to-Noise Ratio	75 dB A-Weighted
Equivalent Noise Level	19 dB A-Weighted

Connectivity

Analog Output

1x XLR 3-Pin Male (on Mic)

Power

Power Sources	Phantom Power
Operating Voltage	V ()

Physical

Color	Black
Construction Material	Metal
Dimensions	ø: 2.1 x L: 6.5" / ø: 5.4 x L: 16.5 cm
Weight	16.05 oz / 455 g

Packaging Info

Package Weight	1.995 lb
Box Dimensions (LxWxH)	9.7 x 7.5 x 3.25"

In the Box

AKG P120 Cardioid Condenser Microphone (Black)
Stand Adapter
Limited 1-Year Manufacturer Warranty

Not in the Box

XLR Cables (Not Included)

Delivery & Shipping

SHIPMENTS AND RETURNS

YOUR PACK SHIPMENT

Packages are generally dispatched within 3 working days after receipt of payment and are shipped via Courrier.

If you prefer delivery by UPS Extra with required signature, an additional cost will be applied, so please contact us before choosing this method. Whichever shipment choice you make, we will provide you with a link to track your package online.

Shipping fees free for orders above 300 AED within UAE , for international shipping please contact us before placing your order

RETURN POLICY

FOR ONLINE PURCHASES ONLY

NOTE: - THIS POLICY IS ONLY APPLICABLE FOR ONLINE ORDERS AND DOES NOT APPLY IN DIGI TECH Office

• Articles are accepted for return in case of any manufacturing defect if returned in an unused condition within 10 days from the date of delivery.

• You may return any article subject to our acceptance on the condition that it was not worn, damaged, resized, engraved or altered.

• On receipt of the product, our quality assurance department will review the condition and make a declaration of acceptance or non acceptance.

• On the basis of the declaration, we will inform you the status within 7 working days of receiving the product.

• On acceptance for product return, we will process your request for the refund within 7 working days.

• Refunds on the purchases made with the credit card will only be credited to the same card. Please allow one month billing cycle in order for your credit card to appear.

• International Shipping charges (for all items shipped outside UAE) will be deducted for all returns based on the applicable shipping charges.

EXCLUSIONS

Items bought through Promotional offers are not eligible for return.

HOW TO PROCEED WITH YOUR RETURN

Call our Customer Service Department on +9714 259 5447 or send a mail to
[email protected]

Include all original packaging and collateral material.

Please provide at least the following information in your return request package.

• Online Order Number

• Reason for Return

• Your contact details

INSURE YOUR PACKAGE

Be sure to ship your item fully insured, and request a return receipt for confirmation that your shipment has reached its destination.

Return shipment charges will be bear by the sender and DIGI TECH will not be responsible for lost or damaged shipment

Please note that returns without any of the above information, uninsured or improperly packaged may not be accepted.

ALL RETURN PACKAGES TO BE MAILED TO:

Attention: Digi Tech Trading LLC.

NO. 504, 5TH FLOOR, City Avenue Building

Deira Port Saied

Dubai, UAE

PO Box 22524 Dubai, UAE

Tel: +9714 259-5447

Following the above mentioned instructions will enable us to process your return effectively.

If you have any questions about our return procedures, please contact us or call +9714 259 5447. Please note that return shipment charges would have to be borne by the sender.